Bookcase Brookings SD

Looking for Bookcase in Brookings? We have compiled a list of businesses and services around Brookings that should help you with your search. We hope this page helps you find Bookcase in Brookings.

Lowe's
(605) 696-2730
812 25Th Avenue
Brookings, SD
Hours
M-SA 7 am - 9 pm
SU 8 am - 8 pm

Lowe's of Brookings
605-696-2730
812 25th Ave Brookings, SD, 57006
Brookings, SD
 
Fastenal- Brookings
605-697-6631
1321 Main Avenue South Brookings, SD, 57006
Brookings, SD
 
J & K Building Center
(605) 997-3714
110 S Wind
Flandreau, SD
 
Fastenal- Huron
605-352-0034
355 Market St W Huron, SD, 57350
Huron, SD
 
Homestead Building Supplies
(605) 692-6191
823 S Main Avenue
Brookings, SD
 
Ace Hardware
(605) 697-5223
710 22nd Ave S, Brookings Mall
Brookings, SD
 
Brookings Rent-All
(605) 697-5544
803 Main Avenue South
Brookings, SD
 
The Home Depot
(605)361-7439
2523 S Louise Ave
Sioux Falls, SD
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Knecht Home Ctr Spearfish
(605) 642-8836
310 S 26th St
Spearfish, SD
 

How Do I Build A Bookcase?

Answer:
Bookcases are an inexpensive and very practical solution to your storage needs ,

especially if you are a reader like I am. We are going to look at how to do make one in your shop.

To do this, you will need the following items: one piece of 2” x 10” x 12’ lumber cut in half, 2 pieces of 1” x 10” x 8’ lumber cut into 32” sections, 4 L brackets per shelf, saw or router, thin plywood, brads and screws, sandpaper, paint, and stain, drill and drill bits, screwdriver and hammer.

Cut the 2” x 10” x 12” piece of lumber into two six foot pieces, as these will be the sides of your bookcase. Take your 1” x 10” x 8’ piece of lumber into three 32” sections. These will be the top, bottom, and middle shelves. Sand the boards smooth, and then paint or stain the boards and the edges. Attach the L brackets where you plan on putting the shelves, making them three inches from the front and back. Paint them to match the color of your paint or stain so they blend in. Now attach the shelves, and then cut and fit the thin plywood to the back and you are ready to use it.

...

Click here to read the rest of this article from QandAs.com